TC ELECTRONIC IMPACT TWIN | FIREWIRE ZVOČNA KARTICA
Tega izdelka ni več na zalogi
Spletna stran proizvajalca TC ELECTRONIC An elite FireWire interface with 2 mic preamps, 14 ins/14 outs, 24-bit/192kHz HD conversion, and more. Impact Twin is a state-of-the-art audio interface that features groundbreaking technology to ensure that the music you record sounds as good on the inside of your computer as it does on the outside. With the built-in preamp, converters, and recording tools, the TC Electronic Impact Twin offers a pristine path for your music to follow. The interface's two mic preamps use TC Electronic's Impact III Technology which itself features three stages of top-level processing. You get a high-quality and very flexible mic preamp, superior 24-bit/192kHz HD conversion, plus a set of recording channel tools that lets you shape and optimize your sound making it the perfect recording. With each of these stages carefully combined behind Impact Twin's rugged and cool looking exterior, you have a FireWire interface you can take anywhere that offers the ultimate in recording quality. The Impact III mic preamp makes the best of any microphone. Whether you record with the finest vintage tube mics, the most demanding low-budget condensers, or even a handheld dynamic, Impact Twin has been designed from the ground up to maximize the signal you record into your DAW. The preamps gives you maximum flexibility, and whether you're recording instrument, line, or mic; or with or without phantom power; the Impact Twin is one audio interface that works the way you need it to. However, it's not all about the preamps. If your signal path doesn't then lead on to quality converters then you may as well pack up and go home. The TC Electronic Impact Twin's 24-bit/192kHz HD convertors let you select your conversion rate — all the way from 44.1kHz to the high-definition 192kHz — for the ultimate in pristine audio capture and maintaining the essential transients of your sound. For years, TC Electronics has been an innovator in the world of signal enhancement, and Impact Twin includes essential recording channel tools that go even further to optimize your sound with onboard EQ, compressor and de-esser that quickly, simply, and invisibly tame and enhance those signals — no matter what you're recording. TC Electronic Impact Twin Next Generation FireWire Interface Features: Two mic preamps featuring IMPACT III technology 14 ins and 14 outs give you the flexibility to record and monitor just about any device you can think of Channel Tools quickly and easily optimize the tone of your recordings The tone of your guitars is beautifully preserved with two front-panel mounted Hi-Z guitar-optimized inputs Direct monitor reverb provides a simple way to add reverb at the monitor stage so singers can enjoy quality reverb through their headphones iCheck (Integrity Check) feature provides a shortcut for revealing artifacts of data reduction — essential when encoding MP3 or AAC files M40 Studio Reverb is based on algorithm from TC Electronic's acclaimed Reverb 4000 processor Multipurpose ResFilter provides ultra-fat filter sound. Assimilator EQ curve assimilation tool lets you quickly grab an EQ curve from any sound and apply it to your own Quick compressor access and feedback JetPLL jitter reduction 24-bit/192kHz HD conversion Ableton Live Lite 8 TC Electronic Edition included Acrylic front panel Plated and coated steel back plate Rubber coated soft touch cover surrounding metal chassis 3 LEDs per channel Mains Power Supply (included) 12V DC, adapter for 90 to 240 VAC, 50Hz to 60Hz (auto select) TC Electronic Impact Twin Next Generation FireWire Interface Specifications: Digital Inputs and Outputs Connector (S/PDIF): RCA Phono, 75 Ohm Formats (S/PDIF and TOSLINK) S/PDIF (24-bit), IEC 958, Pro-status bits Connector (ADAT or TOSLINK): Optical Pipe Format (ADAT): 8-ch. @ 48kHz, 4-ch. SMUX @ 96kHz Digital IO engine: TCAT DICE II, handling all IO formats Clock and Jitter: Internal sample rates: 44.1, 48, 88.2, 96, 176.4 and 192kHz External sample rates: 43 to 193kHz, jitter rejection at all rates Jitter rejection engine: JET technology in TCAT DICE II Jitter rejection filter (4th order): > 3dB @ 10Hz, > 100dB @ 600Hz DIO interface jitter: < 1 ns peak, BW: 700Hz to 100kHz AD/DA conversion jitter: < 42 ps RMS, BW: 100Hz to 40kHz Digital output phase (stand-alone and across network): < 0.5 % of Sample Period Input slip sample tolerance(all DIs): +50 % to -50 % of sample period Processing delay DIO @ 96/48kHz: 0.15/0.3ms Frequency response DIO: DC to 23.9kHz &plumsn; 0.01dB @ 48kHz Line Inputs Ch. 1, 2, 3, 4 Connectors: 1/4" Phone Jack (balanced) Impedance, Bal./Unbal.: 20 kOhm/25 kOhm Full scale input level @ 0dBFS: +13dBu THD+N: < -100dB (0.001 %) @ 1kHz, -1dBFS SNR: >111dB(A), >108dB, 20Hz to 20kHz Frequency response: +0/-0.5dB, 20Hz to 20kHz Crosstalk: < -100dB, 20Hz to 20kHz ADC A to D conversion: 24-bit, 128 x oversampling bitstream A to D delay: 0.68ms / 0.63ms @ 44.1kHz / 48kHz Mic. Inputs Ch. 1, 2 Connectors: Neutrik Combo (XLR) Sensitivity full range pad on/off: -10/+10dBu <> -52/ -32dBu Total preamp gain: 62dB Impedance, Pad on/off: 2000/1300 ohm NF @ Rg = 150 ohm, Max. Gain: < 4dB EIN @ Rg = 150 ohm, Max. Gain: < -127dBu THD+N, Min. Gain: < -100dB (0.001%) @ 1kHz, -1dBFS SNR, Min. Gain: >109dB(A), >106dB, 20Hz to 20kHz 48-bit Precision EQ Hi Gain: +/- 12dB Hi Frequency: 200Hz to 40kHz Hi Bell: On: 6dB/oct. shelve / Off: Parametric Hi Mid Gain: +/- 12dB Hi Mid Frequency: 200Hz to 20kHz Hi Mid Bandwith: 0.10 to 4.0 Lo Mid Gain: +/- 12dB Lo Mid Frequency: 20Hz to 2kHz Lo Mid Bandwidth: 0.10 to 4.0 Lo Gain: +/- 12dB (only available when Lo cut is off) Lo frequency: 20Hz - 400Hz Lo CUT: On: Cut / Off: 6dB/oct. shelve Compression/De-Essing Compression/De-Essing styles: "Female Voice", "SoftFemale Voice", "HardMale Voice", "SoftMale "Voice", "Hard", "Guitar", "Bass", "Speak", "Sax", "Trumpet", "Snare", "Percussion", "All purpose" Instr. Inputs Ch. 1, 2 Connectors: Neutrik Combo (1/4" phone jack) Sensitivity Range: -25dBu <> +17dBu Total Preamp gain: 42dB Impedance: 1 MOhm THD+N, Min. Gain: < -100dB (0.001%) @ 1kHz, -1dBFS SNR, Min. Gain: >107dB(A), >104dB, 20Hz to 20kHz Crosstalk: < -100dB, 20Hz to 20kHz Monitor/Line Outputs Ch. 1, 2, 3, 4: Connectors: 1/4" phone jack, ground sensing design Impedance: < 100 Ohm Level Range (Ch. 1, 2): -40dBu <> +12dBu (analog gain scale) Fixed Full Scale Range (Ch. 3, 4): +12dBu THD+N: < -94dB (0.002%) @ 1kHz, -1dBFS SNR: >111dB(A), >108dB, 20Hz to 20kHz Freq. Response: +0/-0.1dB, 20Hz to 20kHz Crosstalk: < -100dB, 20Hz to 20kHz DAC D to A Conversion: 24-bit, 128 x Oversampling Bitstream D to A Delay: 0.70ms / 0.65ms @ 44.1kHz / 48kHz Headphone Outputs Connectors: 2 x 1/4" Phone Jack (Stereo) Impedance: 80 Ohm Gain level range: -80dBu <> +16dBu @ 300 ohm (analog gain scale) THD+N: < -94dB (0.002%) @ 1kHz, -1dBFS SNR: >103dB(A), > 100dB, 20Hz to 20kHz Freq. response: +0/-0.1dB, 20Hz to 20kHz Crosstalk: < -100dB, 20Hz to 20kHz Power @ 40Ohm Load: 200mW Power @ 600Ohm Load: 93mW EMC complies with: EN 55103-1 and EN 55103-2, FCC part 15, Class B, CISPR 22 Class B EMC certified to: IEC 60065, EN 60065, UL60065 and CSA, E60065 CSA FILE #LR108093 Operating Temperature: 32° F to 122° F (0° C to 50° C) Storage Temperature: -22° F to 167° F (-30° C to 70° C) Humidity: Max. 90% non-condensing Control interface: MIDI In/Out: 5-Pin DIN FireWire (DAW): IEEE 1394a, IEC 61883 PPM meter (Ch. 1, 2) FireWire bus-powered: 8 to 30 VDC Power consumption: less than 14W
Trenutno ni ocen.